EN
AR
FR
DE
IT
JA
KO
NO
PT
RU
ES
ID
TH
TR
MN
- Introduction
Introduction
The air mixer ADM131 is mainly composed of a vane air motor, a hoop, a coupling, a stirring shaft and apro peller. It is designed for a 5 gallon, high volume, low pressure environmental spraying and paint included software package. The speed of the air mixer can be adjusted by the air inflow to meet the requirements of different working conditions. The air mixer is widely used for stirring chemical solutions such as ink, oil, glue, paint, etc.
| Mixer Model | ADM131 |
| Motor Model | HX1AM-NCC-95 |
| Motor Power | 0.33 kW |
| Motor Material | Cast Iron |
| Max. Speed | 10000 rpm |
| Recommended Speed | 500-2000 rpm |
| 316L Shaft Size | Φ12.7×305 mm |
| 316L Impeller Diameter | 4 inches |
| Impeller Type | Propeller Type |
| Number of Impellers | 1 |
| Port Size | 1/8" NPT |
| Hose Diameter | O.D.=6 mm | I.D.=4 mm |
| Air Pressure | 0.4-0.8 MPa |
| Max. Air Consumption | 585 L/min |
| Mounting Type | Vertical Type |
| Weight | 1.4 kg |
| Viscosity | ＜500 cP |
| Mixing Capacity | 20 litres |
Notes
1. Install an automatic air line lubricator in the air line within 18 inches (0.5 meter) or as close as possible to the air motor. Thelubricator needs to be installed upstream of the air motor so that the oil mist will be blown directly into the motor. Make sure thelubricator is always filled with oil.
2. Before connecting to the ports, clean the compressed air connections with low pressure air to remove any dirt or debris.
3. Always use air lines that are the same size, or larger, than the air motor inlet port (refer to port size in the specifications chart).