EN
AR
FR
DE
IT
JA
KO
NO
PT
RU
ES
ID
TH
TR
MN
- Introduction
Introduction
The stainless steel air mixer ADM-V2SPTR-PY6 is mainly composed of a stainless steel vane type air motor,a coupling, a shaft, a propeller type impeller and a customized mounting base with mechanical seal that can withstand 135℃temperature and 3 bar pressure. The air mixer is suitable for mixing 0-100 litres low viscosity solution. It can be mounted vertically onthe mixing container by the flange of the mounting base. The speed of the air mixer can be adjusted by the air inflow to meet there quirements of different working conditions. The stainless steel air mixer is suitable for food, pharmaceutical and chemicalin dustries.
| Mixer Model | ADM-V2SPTR-PY6 |
| Motor Type | HX2AM-V-S |
| Motor Power | 0.68kW |
| Motor Material | 316L Stainless Steel |
| Max. Speed | 3000rpm |
| Recommended Speed | 500-2000rpm |
| 316L Shaft Size | φ15.88mm×600mm |
| 316L Impeller Diameter | 6 inches |
| Impeller Type | Propeller Type |
| Number of Impellers | 1 |
| Port Size | 1/4" NPT |
| Hose Diameter | O.D.=10mm | I.D.=6.5mm |
| Air Pressure | 0.4-0.8MPa |
| Max. Air Consumption | 825L/min |
| Mounting Type | Flange Mounting |
| Weight | 8.8kg |
| Viscosity | ＜500cP |
| Mixing Capacity | 0-100litres |
Notes
1. The air mixer must be installed vertically.
2. Before connecting to the ports, clean the compressed air connections with low pressure air to remove any dirt or debris.
3. Always use air lines that are the same size, or larger, than the air motor inlet port (refer to port size in the specifications chart).