EN
AR
FR
DE
IT
JA
KO
NO
PT
RU
ES
ID
TH
TR
MN
- Introduction
Introduction
Product Introduction: The HXCV05L-15000 air motor is a small, light vane air motor of which the housing is made of aluminium. It has a low torquebut a very high free speed that can be up to 30000rpm. It can be used in high speed cutting equipments. Such as fiber cutting, non-woven cutting,thin film cutting, etc.
| Motor Model | HXCV05L-15000 |
| Motor Power | 0.05 kW |
| Load Speed | 15000 rpm |
| Torque | 0.03 N·m |
| Free Speed | 30000 rpm |
| Direction of Rotation | Counter Clockwise |
| Air Pressure | 0.69 MPa |
| Air Consumption | 300 L/min |
| Port Size | Air Inlet: NPT 1/8" Air Outlet: NPT 1/4" |
| Hose Diameter | O.D.=6 mm | I.D.=4 mm |
| Shaft Diameter | 6 mm (M6) |
| Housing Material | Aluminium |
| Mounting Type | Clamp or Hub Mounted |
| Weight | 150g |
Notes
1. Install an automatic air line lubricator in the air line within 18 inches (0.5 meter) or as close as possible to the air motor. The
lubricator needs to be installed upstream of the air motor so that the oil mist will be blown directly into the motor. Make sure the
lubricator is always filled with oil.
2. Before connecting to the ports, clean the compressed air connections with low pressure air to remove any dirt or debris.
3. Always use air lines that are the same size, or larger, than the air motor inlet port (refer to port size in the specifications chart).