EN
AR
FR
DE
IT
JA
KO
NO
PT
RU
ES
ID
TH
TR
MN
- Introduction
Introduction
The air mixer HXIHB-V6-DFY1 6 is mainly composed of a vane or piston air motor, a coupling, a stirring shaft, two folding impellers and a mounting bracket. It is suitable for 500-1000 litres IBC tank. The mixer can be fixed on the frame of the IBC tank. The folding impellers can enter into the tank through the bunghole of the tank. The speed of the air mixer can be adjusted by the air inflow to meet the requirements of different working conditions. The air mixer is widely used for stirring chemical solutions such as ink, oil, glue, paint, etc.
| Mixer Model | HXIHB-V6-DFY16 |
| Motor Model | HX6AM-ARV-54 |
| Motor Power | 3kW |
| Motor Material | Cast Iron |
| Max. Speed | 3000rpm |
| Recommended Speed | 500-2000rpm |
| 304 Shaft Size | φ20×1000mm |
| 304 Impeller Diameter | 16 inches |
| Impeller Type | Folding Type |
| Number of Impellers | 2 |
| Port Size | 1/2" NPT |
| Hose Diameter | O.D.=16mm | I.D.=12mm |
| Air Pressure | 0.4-0.8MPa |
| Max. Air Consumption | 3800L/min |
| Mounting Type | Horizontal Bracket Mounting |
| Weight | 32kg |
| Viscosity | ＜2000cP |
| Mixing Capacity | 1000litres |
Notes
1. Install an automatic air line lubricator in the air line within 18 inches (0.5 meter)or as close as possible to the air motor. The lubricator needs to be installed upstream of the air motor so that the oil mist will be blown directly into the motor. Make sure the lubricator is always filled with oil.
2. Before connecting to the ports, clean the compressed air connections with low pressure air to remove any dirt or debris.
3. Always use air lines that are the same size, or larger, than the air motor inlet port (refer to port size in the specifications chart).